Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restore and Repair Black Plastics

Model: (Various brands) Various
Part: Body

Video tutorial

In this video, we will explore some methods to repair plastics: the simplest, but least durable, is WD-40, or a dashboard renovator, which has a limited lifespan. Remember that in any case, the piece to which you apply the product must always be thoroughly cleaned first.

If the plastic has white marks due to bending, the only solution is to reshape it with a high-temperature hairdryer. This will eliminate the bend.

It is also the best way to restore it durably, provided it has no peeling but is just faded. If it has scratches and peeling, it must be cleaned well first, then treated with a special plastic filler, followed by sanding with very fine sandpaper, say 120 grit, to make it smooth.

Finally, paint it with a plastic bonding primer, preferably applying a rough layer first and then a smooth one for finishing. This way, the colour will adhere well, and the piece will look as good as new.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Restore Interior Plastics
How to Restore Interior Plastics
(Various brands) Various If the interior trim plastics appear dull or have scratches, you can make them shine again with a simple trick: just heat them with a heat gun, being…
How to Fix Sticky Dashboard Plastics
How to Fix Sticky Dashboard Plastics
(Various brands) Various In this article, you will learn how to fix sticky dashboard plastics that become tacky over time. First, clean the surface thoroughly with white spir…
How to regenerate the headlights of the vehicle
How to regenerate the headlights of the vehicle
(Various brands) Various (2010-2019 / ) Today we will explain how to regenerate the headlights of a vehicle in a simple and inexpensive way. We spray water on the headlight and using a fine…

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos