Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What you need to know about roof bars

Model: (Various brands) Various
Part: Body

In this video, you can learn many things about roof bars, a very useful accessory for transporting on the roof of your car everything that does not fit inside; they are almost always made of steel (square-shaped) or aluminium (more aerodynamic shape), which are quieter. There are various ways to secure the bars; plates, fixed points, longitudinal bars, whether high or low, or (for cars equipped with them) the gutters. Always remember to load the car so that the load is well distributed. The load can extend sideways by 30 cm, and 30% of the length of the car at the rear, provided you install the protruding load sign. Loads must NOT extend at the front. For mounting, the first bar should be positioned 15 cm forward of the junction point of the two doors and the second 70 cm away from the first. Tighten the screws between 2 and 4 Nm and do not forget the seals, if you do not want to hear an annoying whistle while driving.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting Roof Bars on Your Car
Fitting Roof Bars on Your Car
(Various brands) Various In this video, you will learn how to fit roof bars on your car. Roof bars vary depending on your car model, so purchase the specific ones. To fit the…
What are the three things to know before buying summer tyres?
What are the three things to know before buying summer tyres?
(Various brands) Various With the nice weather approaching, more drivers want to fit summer tyres on their cars. Here are three important things to know before making this pu…
Fitting Roof Bars
Fitting Roof Bars
(Various brands) Various If you intend to fit roof bars on your car, the video and description below outline the various steps and necessary information for correct installat…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos