Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Universal Roof Bars

Model: (Various brands) Various

In this detailed video, see how to install universal roof bars. Universal roof bars are used by those who do not have roof rails (fixed bar secured to the car roof) to attach the bars. Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Place the brackets at both ends of the doors and once the width of the anchoring brackets is adjusted (place a rubber square under the metal bracket that rests directly on the bodywork), tighten the pins with the butterfly bolt until fully anchored and aligned on the car roof. Finally, apply the safety caps on both sides.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting Roof Bars on Your Car
Fitting Roof Bars on Your Car
(Various brands) Various In this video, you will learn how to fit roof bars on your car. Roof bars vary depending on your car model, so purchase the specific ones. To fit the…
Jeko - Universal Snow Straps
Jeko - Universal Snow Straps
(Various brands) Various Universal snow straps, installation guide and practical demonstration of their effectiveness on snow and ice (tested on Renault Megane, Lancia Delta,…
How to Install Roof Bars on a Car Already Fitted with Side Bars
How to Install Roof Bars on a Car Already Fitted with Side Bars
(Various brands) Various These bars, called "crossbars" because they run across the roof, form the traditional roof rack on a vehicle that comes from the factory equipped wit…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos