Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the AdBlue Warning Light

Model: (Various brands) Various
Part: AdBlue warning light

Video tutorial

The orange warning light related to the pollution control system, namely the AdBlue light, comes on when it is necessary to top up the fluid in the tank. If the light turns red, the vehicle will have limited range and will stop running until it is topped up. To reset the light, turn on the ignition and increase the engine revs.

On some models, it is necessary to perform the reset using diagnostic software to resolve the issue. On other models, the reset is done using the vehicle's menu.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

(Various brands) Various To reset the AdBlue warning light when it is flashing, accompanied by an audible signal and a message indicating that the remaining driving range is …
(Various brands) Various To reset the AdBlue warning light using the VCDS diagnostic system, follow the instructions below and refer to the video. First, connect your PC to t…
(Various brands) Various Today's tutorial video will guide you through the steps to reset the AdBlue warning light on your vehicle. The first step is to turn on the instrumen…

    Frequently Asked Questions

    • Vari - How much does it cost to replace the AdBlue tank? Read answer

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos