Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. (Various brands)
  4. :
  5. Various
  6. : How to replace a CV joint

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Checks and maintenance
Operation: How to replace a CV joint

In this video we see how to replace a constant velocity joint: first of all a technical drawing shows us which are the important measurements to take in order to proceed with the purchase. First, we need to remove the boot, which if damaged we can cut easily. The joint can be secured on the driveshaft by a snap ring or a circlip; in any case, to separate the joint from the driveshaft, a rubber mallet will be enough. Before assembly, we compare the two joints to make sure they are identical; we replace the snap ring, then we fit the boot, then we place the joint on the snap ring and push it into place; usually the appropriate grease is included in the assembly kit; we squeeze it into the boot and then secure the boot with the clamps. Operation completed.


Posted on 25 March 2024 by ScegliAuto



Do-it-yourself CV joint boot replacement
(Various brands) Various Raise the car with a jack and remove the wheel by unscrewing the bolts. Go to work on the rear of the bike: split the two metal clamps with a flat sc
Disassembly of car constant velocity joint
(Various brands) Various In this video tutorial we will see the main steps and instructions to be able to disassemble the CV joint in a car. First we lift the car and go to d
How to change a half shaft
(Various brands) Various In this video, we see how to change a half shaft: it is a component that transmits torque from the differential. The arrangement and number of half s

    Frequently Asked Questions

    • Vari - What does it mean when the "Hill Hold Control" system is not available? Read Answer
    • Vari - What does x100 mean? Read Answer
    • Vari - Why is the trunk of the Mercedes locked? Read Answer
    • Vari - What does the illuminated ABS light indicate on the Kymco Downtown 300I? Read Answer
    • Vari - When does the message SRS FAULT VISIT WORKSHOP appear in Mercedes cars? Read Answer
    • Vari - What does the spring-shaped indicator light indicate? Read Answer
    • Vari - What does the glow plug indicator on Mercedes indicate? Read Answer
    • Vari - What do the red lights on Harley Davidsons indicate? Read Answer
    • Vari - Why is the fuel cap locked? Read Answer
    • Vari - What does code 84 mean in Opel? Read Answer
    • Vari - What should you do if the remote control of a Volkswagen car is not working? Read Answer
    • Vari - What is the position of the oil drain plug in the Yamaha YZ450GF? Read Answer
    • Vari - Why does the engine malfunction light turn on in the Piaggio Vespa GTS 300? Read Answer
    • Vari - What does the term "Passive entry" in Jeeps indicate? Read Answer
    • Vari - What does the Service light on the MG 6 indicate? Read Answer
    • Vari - What does the EDC warning light indicate in an Iveco vehicle? Read Answer
    • Vari - What problems does the Piaggio MP3 400 have? Read Answer
    • Vari - How often should the Ducati Scrambler be serviced? Read Answer
    • Vari - What is the cost of a service for the Yamaha Majesty 400? Read Answer
    • Vari 2019-2026 - Why won't the Fitbit Versa dashboard turn on? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos