Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing a Car CV Joint

Model: (Various brands) Various

In this video tutorial, you will see the main steps and instructions for removing the CV joint from a car. First, lift the vehicle and remove the wheel by taking off the bolts. Next, completely remove the braking system and then the hub and hub carrier. At this point, remove any gaiter seal from the joint (the gaiter) and use a puller or compressed air gun to extract the CV joint, as shown in the video. Refit the new one, cleaning the surface and greasing it well.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the CV Joint Boot
Replacing the CV Joint Boot
(Various brands) Various In this video tutorial, you will learn how to remove and replace the CV joint boot on a generic car. The procedure does not vary much from car to car…
How to Change a Driveshaft
How to Change a Driveshaft
(Various brands) Various In this video, you will see how to change a driveshaft: it is a component that transmits torque from the differential. The arrangement and number of …
How to Replace a CV Joint
How to Replace a CV Joint
(Various brands) Various In this video, you will see how to replace a CV joint: first, a technical drawing shows the important measurements to take for purchasing. First, rem…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos