Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on Scania?

Model: (Various brands) Various
Part: Service warning light

In order to reset the Service light of Scania vehicles, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on the lower left side of the dashboard, next to the steering column. Once the scanner is connected, you can follow the instructions shown in the tutorial, selecting the model of the vehicle and its corresponding version. When everything has been done following the instructions, you will notice that the Service light will disappear and you can then disconnect the scanner and turn off the ignition.

Posted on 24 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses on the Scania 5?
(Various brands) Various The fuses on the Scania 5 are located inside the only fuse box installed on the vehicle: this is positioned within the cabin, in the part of the dash…
Where are the fuses of the Scania located?
Where are the fuses of the Scania located?
(Various brands) Various The fuses of Scania vehicles are generally contained within the only fuse box present on the vehicle: in this type of vehicle, the box can be found i…
Where are the fuses of the Scania R450 located?
(Various brands) Various The fuses of the Scania R450 are located inside the only fuse box that is installed inside the vehicle: in this type of car, this box can be found in…

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos