Do it yourself
Frequently asked questions about cars and motorcycles

How does the TPMS work on cars?

Model: (Various brands) Various
Part: Tire pressure warning light

In this video we see how the TPMS system works: it is explained by a big name in the world of tires, like Continental. The contact with the ground of a car is delegated to the tires, and if one of the tires has too low pressure, it deforms, decreasing the contact with the ground in the central part. Instead, properly inflated tires evenly distribute the weight of the car, also positively affecting fuel consumption; technical studies have shown that over 25% of drivers drive with inadequate tire pressure. Since November 2014, all M1 category vehicles (up to 8 seats + driver) in the EU must be equipped with a tire pressure monitoring system, in order to improve driving stability and braking safety. There is an indirect system based on tire rotation through the ABS unit, and once all tires are checked, the system must be reset. The direct system uses sensors to provide the driver with information on which tire has lost pressure, also providing information on the current pressure, so that it can be resolved immediately.

Posted on 3 May 2024 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various This very interesting technical explanation introduces us to a question that perhaps few of us have ever considered: how does the parking brake work …
(Various brands) Various Since November 2014, every vehicle must have a tyre pressure monitoring system (TPMS). These systems can be "indirect" when there is no physical devi…
(Various brands) Various This procedure is valid for all vehicles in the V.A.G group, including Volkswagen, Audi, and Seat. When the heating no longer works and warm air is n…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos