Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the logo projector in your car's door sill

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

In this video, you can see a system that is truly accessible for anyone to install the logo projector in the door sill of the door, perhaps just the driver's side: there is no need for complicated wiring or to be an electronics expert. Simply go to the andmonc.com website and type "door sill logos" into the internal search engine; you will find what you are looking for, with prices typically around £30. Just apply it with adhesive to the door panel, then for the first time, turn it on manually; thanks to an infrared sensor, it will then turn on automatically when the door is opened.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light on Your Car
How to Replace the Third Brake Light on Your Car
(Various brands) Various How to replace the third brake light on your car? In this guide, learn how to remove the central rear light. Remove the plastic inspection caps with …
How to Set the Car Logo on Blaupunkt Key Largo 970
How to Set the Car Logo on Blaupunkt Key Largo 970
(Various brands) Various In this video, see how to set your car logo on the Blaupunkt Key Largo 970 radio: from the "Home" screen, go to "Settings" and click on the left colu…
How to Set the Car Logo at Ignition on the On-Board Computer
(Various brands) Various Setting the car logo at ignition on the on-board computer is a straightforward task to perform independently. First, turn on the on-board computer. N…

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos