Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Car Logo on Blaupunkt Key Largo 970

Model: (Various brands) Various
Part: Car stereo

Video tutorial

In this video, see how to set your car logo on the Blaupunkt Key Largo 970 radio: from the "Home" screen, go to "Settings" and click on the left column under "General". Scroll through the various options on the screen until you reach "Factory Settings" where you will be prompted for a password, which is the standard "1234"; this will allow you to enter the operational menu, where you will scroll down the left column to the "Startup Logo" option: all possible logos will appear on the large screen to the right, and you can choose your car's logo.

Select it, then go back with the arrow and turn off the ignition: upon restarting, the chosen logo will appear on the multimedia screen.


Updated on 29 September 2026 by ScegliAuto


Related tutorials

The Three Setting Levels of the Blaupunkt 980 Key Largo
The Three Setting Levels of the Blaupunkt 980 Key Largo
(Various brands) Various In this video, we can see that there are three setting levels on the Blaupunkt Key Largo 980 multimedia system: the first shows the actual Android se…
How to Set the Car Logo at Ignition on the On-Board Computer
(Various brands) Various Setting the car logo at ignition on the on-board computer is a straightforward task to perform independently. First, turn on the on-board computer. N…
How to set up the logo of your car on an Erisin 2DIN car stereo
How to set up the logo of your car on an Erisin 2DIN car stereo
(Various brands) Various This video is not dedicated to a car model, but to a 2Din radio model made in China, which can therefore be installed on any car. If we want to custo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos