Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Fairings of the Honda PCX 150?

Model: (Various brands) Various
Part: Body

Video tutorial

Dismantling the fairings of the Honda PCX 150, as shown in this video, requires the use of T or socket wrenches to remove the various screws securing all the body components. This can easily be done as a DIY task without the need for specialised personnel, allowing you to proceed with your own needs, such as washing the fairings, graphic customisations, and more.

Start with the windscreen, then continue with the lower side panels, footrest area, followed by the side fairings around the seat, the under-seat compartment, and finally the parts of the central tunnel and the front.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How do you set the time on the Honda PCX?
How do you set the time on the Honda PCX?
(Various brands) Various We are now used to having a wide range of real-time information available to us while using our moped, just like with cars. Kilometers traveled, fuel…
How to Change the Speedometer from km/h to Miles on the Brixton 150
How to Change the Speedometer from km/h to Miles on the Brixton 150
(Various brands) Various In this video tutorial, you can see how to change the speedometer on the Brixton 150 from km/h to miles by following a few simple steps that will hel…
How to Replace the Battery on a Piaggio Liberty 150
How to Replace the Battery on a Piaggio Liberty 150
(Various brands) Various This video illustrates how to replace the battery on a Piaggio Liberty 150. First, ensure the motorcycle is turned off and open the seat compartment.…

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos