Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to permanently remove moisture from the rear lights

Model: (Various brands) Various
Part: Tail light

We know how annoying it is, after a period of heavy rain, to find the rear lights holding moisture inside. We then remove the optical group from its housing, disconnect the electrical plug and remove the bulb inside. We dry the inside of the headlight with a dry cloth and then remove any residual moisture with the hot air from a hairdryer (but it must not be too hot, or it will deform the plastics). When it is well dried, we apply a layer of silicone all around the inner frame of the optical group to seal any holes that may have formed. Opening the sealant cap, we make a slanted cut so that it can come out neatly. We carefully finish and put the optical group back in place.

Posted on 9 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How can moisture buildup in the car headlight be eliminated?
How can moisture buildup in the car headlight be eliminated?
(Various brands) Various The creation of humidity in the front headlights of the car could, immediately or over time, reduce the effectiveness of the light emitted by the opt…
How to Determine if It's Time to Change the Brake Fluid
How to Determine if It's Time to Change the Brake Fluid
(Various brands) Various This video shows how to assess whether the brake fluid (incorrectly referred to as "oil") needs to be changed. The tool shown in the video is very us…
How to prevent car windows from misting up?
How to prevent car windows from misting up?
(Various brands) Various Condensation on the windows forms due to humidity and temperature differences inside and outside the cabin. When the cabin is warm, humidity condense…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos