Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly of the panoramic roof opening command of the Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008

Today's main institutions will show us how to dismantle and replace the opening and closing command of the panoramic roof and the interior light fixture of the Volkswagen Golf. First of all, we get on board the vehicle and start levering on the side of the door today to detach it and remove it; we unscrew the screws of the light fixture and disconnect the electrical connector found underneath, as shown in the video. At this point, it will be possible to also remove the button of the panoramic roof, replacing it with the new one, following the video tutorial until the end!

Posted on 24 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's guide will show you the main steps to remove and replace the panoramic roof of the Volkswagen Golf, GTI version. First, get into the vehicle …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Shortly, we will see the instructions that will allow us to reset and calibrate the sunroof motor of the Volkswagen Golf. First, we get into the car …
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today we will discover the instructions that will allow us to disassemble and replace the panoramic roof of the Volkswagen Golf. First, we get on boa…

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos