Do it yourself
Frequently asked questions about cars and motorcycles

Positioning and internal fuse diagram of the Volkswagen Polo.

Model: Volkswagen Polo MK III, Polo III, Polo 3, MK 3, 6N - Years 1994-2003
Part: Fuse box

These brief and simple instructions will show us the positioning of the internal fuse box and how to locate the diagram on the Volkswagen Polo. First, we open the front door on the driver's side and start removing the plastic cover found at the bottom left of the dashboard, next to the steering wheel; inside we will find the fuse box, as shown in the video. At this point, we find the fuse diagram and chart in the vehicle's owner's manual, where we can find all the codes and amperages (useful for any replacements).

Posted on 28 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) This brief guide will show us the layout and positioning of the internal fuses of the Volkswagen Polo. First of all, we open the front door on the dr…
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) In this guide, we will briefly see the positioning and the diagram of the internal fuses of the Volkswagen Polo, in simple steps. First, we get on bo…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Briefly, we will see the instructions that will allow us to access the internal fuse box of the Volkswagen Polo, obtaining the diagram and layout. Fi…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - What is the location of the power steering fuse on the Volkswagen Polo? Read answer
    • Polo 2009-2017 - Where is the wiper fuse located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Where is the Volkswagen Polo wiper relay located? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos