Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlamp on the Volkswagen Golf 7?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

Removing the front headlamp from a vehicle, in this case, the Volkswagen Golf 7, can be necessary for various reasons, such as renewing the plastic of the lamps, replacing them for a facelift, or because they are broken, etc. The removal process, as you can see and hear in this video guide, involves: loosening the fixing bolts located under the bumper, which must be removed, taking off the steel bar present at the top of the headlamps, and finally accessing from the front wheel arch to remove the rear bolts.

The last step is to pull the aforementioned headlamp outwards and disconnect the electrical connector behind it.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp of the Volkswagen Golf
How to Replace the Front Headlamp of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's instructions will show you how to remove and replace the front headlamp of the Volkswagen Golf in simple steps. First, open the bonnet of the…
How to replace the headlight bulb of the Volkswagen Golf 7
How to replace the headlight bulb of the Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) If you want to replace one of the bulbs in the front headlight of your Volkswagen Golf Mk7 quickly and safely, just follow all the steps described in…
How to Remove the Front Headlight on a Volkswagen Golf 4
How to Remove the Front Headlight on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Here’s how to remove the front headlight on a Volkswagen Golf 4: pull the plastic lever located at the bottom left of the dashboard, then lift the bo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos