Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front hub bearing in the Volkswagen Passat?

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Bearing

In this tutorial we can see how to replace the front wheel bearing in the Volkswagen Passat, a simple operation if you have good manual skills. First of all, we open the hood, then we unscrew the cap of the brake fluid reservoir, lift the car and remove the wheel on the side we will be working on. We then remove both the brake caliper and the disc, remove the fixing nut of the half shaft and proceed by unscrewing the bolts of the bearing. At this point we can clean any dirt present, insert the replacement and reassemble everything following the reverse procedure.

Posted on 6 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replace Front Wheel Hub Bearing on Volkswagen Passat B6
Replace Front Wheel Hub Bearing on Volkswagen Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) In this video, learn how to remove and replace the front wheel hub bearing on a Volkswagen Passat B6. First, lift the vehicle and remove the front wh…
Replacing the Front Wheel Hub Bearing
Replacing the Front Wheel Hub Bearing
Volkswagen Passat (1996-2005 / 3BG, B5) To replace the front wheel hub bearing, you need to remove the hub itself; start by lifting the vehicle on a lift and removing the front wheel from t…
How to Replace the Front Brake Disc of a Volkswagen Passat
How to Replace the Front Brake Disc of a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before starting, lift the front end of your Volkswagen Passat. Begin by unscrewing and removing the bolts that secure the front wheel, then remove th…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos