Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Front Wheel Hub Bearing on Volkswagen Passat B6

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Bearing

In this video, learn how to remove and replace the front wheel hub bearing on a Volkswagen Passat B6. First, lift the vehicle and remove the front wheel. Next, undo the bolts of the brake caliper and remove it from the brake disc. Then, using a T30 Torx socket, unscrew the screws of the disc and remove it. Now, using a 24 mm socket, remove the hub bolt and then the nuts located under the wishbone. Finally, separate the driveshaft from the hub and unscrew the fixing screws to remove and replace it, as shown in the video!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front hub bearing in the Volkswagen Passat?
How to replace the front hub bearing in the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) In this tutorial we can see how to replace the front wheel bearing in the Volkswagen Passat, a simple operation if you have good manual skills. First…
Replacing the Front Wheel Hub Bearing
Replacing the Front Wheel Hub Bearing
Volkswagen Passat (1996-2005 / 3BG, B5) To replace the front wheel hub bearing, you need to remove the hub itself; start by lifting the vehicle on a lift and removing the front wheel from t…
How to Replace the Front Brake Disc of a Volkswagen Passat
How to Replace the Front Brake Disc of a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before starting, lift the front end of your Volkswagen Passat. Begin by unscrewing and removing the bolts that secure the front wheel, then remove th…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos