Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Volkswagen Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Service warning light

Following these short and simple steps, we will see how to reset the service warning (INSP light) on the Volkswagen Up. First, we get into the car and start by pressing and holding down the "set" button located on the right side of the instrument panel; then we turn on the instrument panel, keeping the button pressed for about ten seconds, as shown in the video. At this point, we release and press the button once again, permanently resetting the INSP service warning; finally, we turn off the instrument panel and start the engine!

Posted on 4 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Inspection Light on a Volkswagen Up
Resetting the Inspection Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Below are the steps to reset the inspection (service) light on the display of the Volkswagen Up dashboard. First, get in the vehicle and press and ho…
Resetting the Service Light on a Volkswagen Up
Resetting the Service Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let’s look at the steps and instructions on how to reset the service light for routine maintenance on a Volkswagen Up. First, enter the cabin and pre…
Resetting the Service and Maintenance Light on a Volkswagen Up
Resetting the Service and Maintenance Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let's see the information that will allow us to reset the service light for the regular maintenance of the engine oil change on the Volkswagen Up. Fi…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos