Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volkswagen Up?

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

Video tutorial

You can clear the Service light displayed on the instrument cluster of the Volkswagen Up by moving inside the cabin, so that you can press and hold the button on the right side of the instrument cluster, labelled "0.0/SET". While holding this button, turn the key and switch on the instrument cluster, checking that the display shows "INSP" and the maintenance interval starts to flash.

When the light becomes solid, you can release the button, noting that the Service light has been successfully reset.

To finish, you should switch off the ignition.


Posted on 6 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volkswagen Up?
How to Reset the Service Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To reset the service light on a Volkswagen Up, go inside the cabin and press the button on the right side of the instrument panel marked "0.0/SET". W…
How to Perform the Maintenance Service and Reset the Service Light on a Volkswagen Up
How to Perform the Maintenance Service and Reset the Service Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) In this guide, we will discover step-by-step instructions on how to perform the routine maintenance service and reset the service light on a Volkswag…
How to Reset the Service Light on the Volkswagen Up
How to Reset the Service Light on the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) In today's video, you will see how to remove the expired service warning on the Volkswagen Up. This video also applies to its siblings, the Seat Mii …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos