Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a 2013 Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

If you want to manually reset the service light in your 2013 Volkswagen Polo, pay attention to the steps described in this guide and then put them into practice. First, get in the car and turn off the ignition if it is on, then locate the "0.0/Set" button below the display and hold it down.

While holding the button, insert the key and start the instrument cluster. Wait a few seconds, then release the "0.0/Set" button and press the button to its left to complete the reset procedure.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Reset the Service Indicator on the Volkswagen Polo
How to Reset the Service Indicator on the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) This guide outlines the steps to reset the service indicator on the Volkswagen Polo. First, get into the vehicle and turn on the ignition. Next, navi…
How to reset the service indicator on the Volkswagen Polo?
How to reset the service indicator on the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this tutorial, learn how to reset the service indicator on the Volkswagen Polo, a very simple and quick operation to perform only after completing…
Resetting the inspection/maintenance service light of the Volkswagen Polo
Resetting the inspection/maintenance service light of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) After carrying out the regular maintenance check, it is necessary to reset the service indicator light; let's see how to do it on the Volkswagen Polo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos