Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on a Volkswagen Caddy TDi

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Service warning light

In today's video, we can see how to reset the service light on a Volkswagen Caddy with a TDi diesel engine, a specific model produced from 2003 to 2010. The operation is very simple and we can do it ourselves. First, we press and hold the button on the right side of the speedometer, then turn on the vehicle's instrument panel without starting the engine. After that, we release the right button and turn the left button on the speedometer clockwise as shown in the video to reset the service light and complete the job.

Posted on 11 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on a Volkswagen Caddy 1.6 TDI
Replacing the Diesel Filter on a Volkswagen Caddy 1.6 TDI
Volkswagen Caddy (2003-2020 / MK 3, 2K) Today's instructions will show you how to remove and replace the diesel filter on a Volkswagen Caddy 1.6 TDI in simple steps. First, open the bonnet …
Guide to Replacing the Timing Belt on the Volkswagen Caddy 2.0 TDI
Guide to Replacing the Timing Belt on the Volkswagen Caddy 2.0 TDI
Volkswagen Caddy (2003-2020 / MK 3, 2K) Follow the main steps to remove and replace the timing belt on the Volkswagen Caddy 2.0 TDI. First, open the bonnet of your car and start by removing…
How to Reset the "Service" Light on a Volkswagen Caddy?
How to Reset the "Service" Light on a Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) Good morning, today we will focus on resetting the "Service" light on our Volkswagen Caddy. Before proceeding, it is necessary to carry out the servi…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos