Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Up
    4. : How to replace the cabin air filter on Volkswagen Up

Volkswagen Up - Video tutorial

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Cabin air filter
Operation: How to replace the cabin air filter on Volkswagen Up

To replace the cabin air filter of the Volkswagen Up, we must, first of all, locate the position of the housing of the same. In our case, it is located inside the passenger compartment of the car, at the bottom right of the driver's side. Once located, we see in the images that it is enough to operate the two interlocking levers of the housing cover with your fingers and, once open, just slide the filter itself downwards. We take the new filter and replace it by performing the reverse operation. We refit the cover of the cabin air filter housing and that's it.


Posted on 19 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Volkswagen Up 2011-2024 - How do you replace the cabin filter on the Volkswagen Up? Read Answer
    • Volkswagen Up 2011-2024 - Where is the Volkswagen Up pollen filter located? Read Answer
    • Volkswagen Up 2011-2024 - Where is the cabin air filter located in the Volkswagen Up? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos