Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Up
    4. : How to remove the cabin air filter on Volkswagen Up

Volkswagen Up - Video tutorial

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Cabin air filter
Operation: How to remove the cabin air filter on Volkswagen Up

Let's see how to remove the cabin air filter on Volkswagen Up. The cabin filter is found at the bottom left of the glovebox. With a plastic lever we peel off the coating placed in the lower left part of the dashboard, get a screwdriver or a cordless drill (if there are tightening screws), remove the cap from the filter holder, then, extract the worn filter from the passenger compartment. We insert a new passenger compartment filter, making it adhere well around the walls of the box, replace the filter box cap and tighten the screws. We check the correct assembly of the previously assembled pieces.


Posted on 24 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Volkswagen Up 2011-2024 - How do you replace the cabin filter on the Volkswagen Up? Read Answer
    • Volkswagen Up 2011-2024 - Where is the Volkswagen Up pollen filter located? Read Answer
    • Volkswagen Up 2011-2024 - Where is the cabin air filter located in the Volkswagen Up? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos