Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the Start&Stop system with VCDS software on the Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

In this guide, we will see the main instructions on how to permanently disable the Start&Stop system on the Volkswagen Golf, using the VCDS software. First, we connect our computer to the diagnostic socket of the engine control unit, then turn on the ignition; the software will allow us to enter the appropriate section related to the Start&Stop and accordingly modify the battery voltage parameters (which will no longer allow the Start&Stop to function). Finally, disconnect the computer and verify the successful completion of the operation!

Posted on 23 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This guide explains how to disable the automatic Start&Stop system on the Volkswagen Golf, Tiguan, and Passat using VCDS software. First, connect the…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To disable the Start&Stop on the Volkswagen Golf, press the dedicated button located on the centre console, featuring the A icon within a circular ar…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To completely disable the Start&Stop system on the Volkswagen Golf, it is not enough to press the button located on the centre console next to the ge…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos