Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the ventilation system nozzles in the car?

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air vents

See other generations:
Video tutorial

The subject in question concerns all circulating vehicles, even if in this specific case we focus on the rear ventilation nozzles of the Volkswagen Touran. The reasons for replacing them can vary, such as the breaking of the internal flow regulator fins, the breaking of the external fins, etc. Let's see how to carry out the work, in this video tutorial: we don't need to use any tools, as the block to be removed is installed by pressure, so it is gripped with hands and pulled, then disconnecting the power cable connector.

To install the replacement, it is positioned and pushed forcefully to lock it in place.


Posted on 26 February 2025 by ScegliAuto


Related tutorials

How to reset the air conditioning in the Volkswagen Touran?
How to reset the air conditioning in the Volkswagen Touran?
Volkswagen Touran (2003-2015 / 1T, MK 1) In this tutorial we can see how to reset the air conditioner in the Volkswagen Touran, an extremely simple and quick operation, to be carried out for…
How to replace the auxiliary belt on the Volkswagen Touran 1
How to replace the auxiliary belt on the Volkswagen Touran 1
Volkswagen Touran (2003-2015 / 1T, MK 1) This video shows how to replace the auxiliary belt on the Volkswagen Touran 1: first, obtain the belt, which can easily be found for under £10 on any…
How to Reset the Service Light on a Volkswagen Touran
How to Reset the Service Light on a Volkswagen Touran
Volkswagen Touran (2015-2024 / 5T, MK 2) To reset the service light on a Volkswagen Touran, follow this procedure: First, turn off the car. After turning off the car, press and hold the 0.0 …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos