Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Touran

Model: Volkswagen Touran 5T, MK 2 - Years 2015-2024
Part: Warning light – error code

To reset the service light on a Volkswagen Touran, follow this procedure: First, turn off the car. After turning off the car, press and hold the 0.0 button located at the centre of the car's speedometer. While holding the 0.0 button, turn the ignition key to position 2. Once the ignition is on, release the 0.0 button. When prompted to confirm the reset, confirm by pressing the OK button on the steering wheel. The procedure is very simple and will take approximately 1-2 minutes to complete. After resetting, to check that it has been done correctly, you can turn the car off and back on.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Volkswagen Touran
How to Reset the "Service" Light on a Volkswagen Touran
Volkswagen Touran (2003-2015 / MK 1, 1T) Before you can begin, sit in the driver's seat of your Volkswagen Touran. Start by pressing and holding the right button located within the instrumen…
Resetting the Maintenance (Service) Light on the Volkswagen Touran
Resetting the Maintenance (Service) Light on the Volkswagen Touran
Volkswagen Touran (2015-2024 / 5T, MK 2) Below are the instructions that will allow you to reset the service light for the routine maintenance of the engine oil change on the Volkswagen Tour…
How to Reset the Service Light on a Volkswagen Touran?
How to Reset the Service Light on a Volkswagen Touran?
Volkswagen Touran (2003-2015 / MK 1, 1T) To reset the Service light on a Volkswagen Touran, press and hold the button located on the right side of the dashboard while it is off. Continue hol…

Other guides you may be interested in

    Frequently Asked Questions

    • Touran 2015-2024 - How to reset the service in the Volkswagen Touran? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos