Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the reverse light bulb of the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

Today we will discover the process of disassembling and replacing the reverse light bulb of the Volkswagen Golf. First, we open the rear hatch of the trunk and start removing the side plastic cap of the plastic trim; then we proceed to detach the bulb holder of the reverse light bulb, as shown in the video.

At this point, we remove the small bulb to replace it with a new one, of the correct type and with the same fitting; we check its operation and then reassemble the plastic cover of the rear hatch panel!


Posted on 12 April 2025 by ScegliAuto


Related tutorials

Replacing the Reverse Light Bulb on the Volkswagen Golf
Replacing the Reverse Light Bulb on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this guide, you will learn how to remove and replace the reverse light bulb in the rear light of the Volkswagen Golf. First, open the boot and sta…
How to replace the reverse light bulb of the Volkswagen Golf 6
How to replace the reverse light bulb of the Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) If the reverse light bulb of your Volkswagen Golf Mk6 has suddenly stopped working and you want to find out how to replace it yourself, then you just…
How to Replace the Reverse Light Bulb on Volkswagen Golf MK7
How to Replace the Reverse Light Bulb on Volkswagen Golf MK7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, see the main steps to disassemble and replace the reverse light bulb on a seventh-generation Volkswagen Golf. First, open the boot and…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos