Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Reverse Light Bulb on the Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Tail light bulb

See other generations:
Video tutorial

In this guide, you will learn how to remove and replace the reverse light bulb in the rear light of the Volkswagen Golf. First, open the boot and start by removing the plastic cover of the reverse light; then disconnect the electrical connector and remove the bulb, as shown in the video.

At this point, install the new reverse bulb of the correct type and with the same fitting; then check the bulb's operation and finally refit the plastic cover of the panel.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

Replacing the Reverse Light Bulb on a Volkswagen Golf
Replacing the Reverse Light Bulb on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In a few simple steps, follow the procedure to remove and replace the reverse light bulb on a Volkswagen Golf. First, move to the rear and open the b…
How to replace the reverse light bulb of the Volkswagen Golf
How to replace the reverse light bulb of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today we will discover the process of disassembling and replacing the reverse light bulb of the Volkswagen Golf. First, we open the rear hatch of the…
How to Replace the Reverse Light Bulb
How to Replace the Reverse Light Bulb
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) If the reverse light bulb on your Volkswagen Golf Mk4 is malfunctioning or not working at all, you must replace it to avoid safety issues and legal p…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos