Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door in the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car door

See other generations:
Video tutorial

In this tutorial, we can see how to disassemble the front door in the Volkswagen Polo, an extremely simple and quick operation. First of all, we open the door in question, then we disconnect the indicated sheath and unplug the large connector that has just been released.

We then unscrew the bolt of the lower hinge with an 8mm XZN key, unscrew the bolt of the upper hinge with a 13mm socket wrench, and remove the door from the supports. At this point, all that remains is to position the replacement part and reassemble everything by simply following the reverse procedure.


Posted on 24 April 2025 by ScegliAuto


Related tutorials

Removing the Front Door of the Volkswagen Polo
Removing the Front Door of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Below are the instructions to remove and replace the front door of the Volkswagen Polo. First, open the front door and start unscrewing the fixing sc…
How to disassemble the front door panel of the Volkswagen Polo
How to disassemble the front door panel of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) The following steps will show us how to disassemble and remove the front door panel of the Volkswagen Polo. First, we open the front door of the car …
How to replace the front door speaker of the Volkswagen Polo
How to replace the front door speaker of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) The instructions in this guide will show us how to disassemble and replace the front door speakers of the Volkswagen Polo. First, we open the front d…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos