Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the handbrake in the Volkswagen Polo?

Model: Volkswagen Polo Polo VI, Polo 6, MK 6, AW1, MK VI - Years 2017-2025
Part: Parking brake

In this tutorial, we can see how to adjust the handbrake in the Volkswagen Polo, a very simple and quick operation. First of all, park the vehicle on a flat surface and with the first gear engaged, then remove the rear cup holder from the center console by leveraging preferably with a plastic spatula. Next, locate the adjustment nut, screw it using a 10mm wrench, and reach the desired tension level. At this point, all that's left is to test the new adjustment on a suitable road, obviously in full safety.

Posted on 21 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake on the Volkswagen Polo
How to Adjust the Handbrake on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To adjust the handbrake on the Volkswagen Polo, first lift the car using a jack. Once the car is off the ground, remove the left rear wheel and take …
How to Adjust the Handbrake of the Volkswagen Polo?
How to Adjust the Handbrake of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To adjust the handbrake of the Volkswagen Polo, lift the part of the centre tunnel located immediately behind the base of the handbrake lever. Once t…
How to Adjust the Handbrake on the Volkswagen Polo
How to Adjust the Handbrake on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Today, you will learn the steps to adjust the handbrake on the Volkswagen Polo. Before adjusting the handbrake, check the wear condition of the rear …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos