Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire alarm in the Volkswagen Polo 5?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

The tire pressure warning light, when illuminated, indicates that one or more tires are underinflated, either due to a puncture, for example, or to a slight and normal pressure loss due to mileage. It is always good to periodically check this and, if necessary, bring it back to the safety values ??set by the manufacturer.

That said, here's how to reset the warning light in question: turn on the instrument panel, open the dashboard glove box and press the Set button inside it, we will immediately see the anomaly turn off.


Posted on 18 September 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light in a Volkswagen Polo 4?
How to Reset the Tyre Warning Light in a Volkswagen Polo 4?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) The tyre warning light mentioned, which is also present in the Volkswagen Polo 4, lights up when there is a flat tyre or more than one. Often, it can…
How to Disable the Alarm on a Volkswagen Polo?
How to Disable the Alarm on a Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To disable the alarm on a Volkswagen Polo, there is no procedure that can be carried out using the controls on the dashboard or steering wheel. You w…
How to Disable the Alarm System of the Volkswagen Polo?
How to Disable the Alarm System of the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To disable the alarm system of the Volkswagen Polo, connect a diagnostic tool to the vehicle's OBD port: this port is located on the dashboard just b…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - How do you reset the Volkswagen Polo tire pressure warning light? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos