Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the inspection (service) light on the Volkswagen Transporter

Model: Volkswagen Transporter T6, MK 6 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

The following steps will allow us to reset the inspection (service) light of the Volkswagen Transporter. First, we get into the vehicle and start by turning on the hazard button; then we press and hold the right button on the instrument panel, turning on the instrument panel (turning the key to position one), as shown in the video.

At this point, we release the button after a few seconds and press the left button once, confirming and performing the maintenance key reset; finally, we turn off the instrument panel and start the engine!


Posted on 3 October 2025 by ScegliAuto


Related tutorials

Resetting the inspection service light of the Volkswagen Transporter
Resetting the inspection service light of the Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) The information provided in this guide will show us how to reset the inspection (service) light of the Volkswagen Transporter, in simple and quick st…
How to reset the "Service" light on a Volkswagen Transporter T5?
How to reset the "Service" light on a Volkswagen Transporter T5?
Volkswagen Transporter (2003-2014 / T5, MK 5) To reset the "Service" light on a Volkswagen Transporter T5, start by pressing and holding the button under the instrument panel. While holding the b…
How to Reset the "Service" Light on a Volkswagen Transporter T6?
How to Reset the "Service" Light on a Volkswagen Transporter T6?
Volkswagen Transporter (2014-2025 / T6, MK 6) Good morning, today’s objective is to reset the "Service" light on your Volkswagen Transporter T6. Start by sitting in the driver’s seat. Then, by pr…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos