Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the fuel filter on the Volkswagen Crafter

Model: Volkswagen Crafter 2E, 2F, MK 1 - Years 2006-2017
Part: Diesel fuel filter

Let's see how to change the diesel filter on a Volkswagen Crafter: the filter is located on the right side of the engine, and it needs to be removed from below, as shown in the video. It is easily accessible, without having to remove other components. We can find the part on auto-doc brand Febi Bilstein with code 173871 at a price of 46.49 euros + 9.95 euros for delivery. Disconnect the electrical connectors, loosen the clamps, remove the fuel lines; have a basin ready, as diesel will come out. Install the new filter by inserting the new gaskets, follow the directional arrows for the correct position of the filter, reconnect the pipes and connectors and tighten the clamps. Some versions may require air bleeding, so do not start immediately, several ignition cycles may be needed. Some versions may require electronic reset of the control unit, using a diagnostic tool.

Posted on 7 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Crafter (2017-2026 / SZ, SY, MK 2) In this tutorial, you will see how to replace the cabin filter in a Volkswagen Crafter van, a very simple and quick operation. First, sit in the pass…
Volkswagen Crafter (2006-2017 / 2E, 2F, MK 1) In order to replace the oil filter of the Volkswagen Crafter, you need to open the hood so that you can access the components located inside the engi…
Volkswagen Crafter (2006-2017 / 2E, 2F, MK 1) It will be possible to make the Service light disappear from the Volkswagen Crafter instrument panel by turning on the instrument panel, inserting th…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos