Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the spare wheel of the Volkswagen Crafter

Model: Volkswagen Crafter SZ, SY, MK 2 - Years 2017-2026
Part: Wheel

Let's see how to remove the spare wheel of the Volkswagen Crafter: we open the rear door and remove the plastic cover at the bottom, using the special tool found in the glove compartment. We remove the inner rubber seal, which simply comes off, and insert the metal tool into the dedicated housing (it has a groove that locks it in place). We use the spare wheel screwdriver to unwind the support cable and slowly lower the spare wheel until it is accessible. The most delicate part is removing the plastic cover without damaging it.

Posted on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port of the Volkswagen Crafter 2 located?
Where is the OBD2 port of the Volkswagen Crafter 2 located?
Volkswagen Crafter (2017-2026 / SZ, SY, MK 2) If you own a second series Volkswagen Crafter and want to find out where the OBD2 port is located, you just need to carefully follow the following st…
Where is and how to reach the fuse box of a Volkswagen Crafter?
Where is and how to reach the fuse box of a Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / SZ, SY, MK 2) Good morning, today's goal is to discover where the fuse box of our Volkswagen Crafter is located and how to reach it. Let's start by opening the fro…
Where is the OBD Port on the Volkswagen Crafter?
Where is the OBD Port on the Volkswagen Crafter?
Volkswagen Crafter (2017-2026 / SZ, SY, MK 2) The "OBD port" or "diagnostic socket" on a 2020 Volkswagen Crafter is located inside the cabin. Specifically, the OBD port is found under the lower p…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos