Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Volkswagen Passat?

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Clock

The clock of the Volkswagen Passat can be adjusted after the instrument panel has been turned on by inserting the ignition key into the corresponding slot: once the instrument panel is activated, it will be possible to hold down the button with the two rectangles located on the left side of the panel. In this way, the hours will start flashing and can be adjusted by pressing the 0.0/SET button repeatedly located to the right of the display; then the button on the left side of the panel must be pressed again and the minutes can be adjusted in a similar way.

Posted on 7 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on a Volkswagen Passat?
How to Set the Clock on a Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To set the clock on a Volkswagen Passat, turn on the instrument cluster so you can use the controls located on either side of the cluster: press the …
How do you set the clock on the Volkswagen Passat?
How do you set the clock on the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) The clock adjustment procedure on the Volkswagen Passat can be done by turning on the instrument panel, so that the controls located on the sides of …
How to Set the Clock on a Volkswagen Passat?
How to Set the Clock on a Volkswagen Passat?
Volkswagen Passat (1996-2005 / 3BG, B5) To set the clock on a Volkswagen Passat, turn on the instrument cluster by rotating the key in the ignition switch. Once the cluster is powered, use …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos