Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the spark plugs on the Volkswagen Golf VI.

Model: Volkswagen Golf MK 6, Golf 6, Golf VI, 5K1 - Years: 2008, 2009, 2010, 2011, 2012
Part: Spark plugs

See other generations:
Video tutorial

Let's see in this video how to replace the spark plugs on the Volkswagen Golf VI: we start by opening the hood of the car and removing the engine cover. Then, we disconnect the ignition coil connectors by gently lifting the wiring and moving it to the side.

Next, we lift the ignition coils and remove them from the spark plug wells, numbering them to remember where they need to be repositioned. Clean the wells and then unscrew the spark plugs and take them out, being careful not to let them fall into the well.

Apply anti-seize lubricant on the threads of the new spark plugs and grease on the terminals, then install them, again being careful not to let them fall into the well. Tighten them to 25 Nm, then put the coils back in place, reconnect the connectors, and finally replace the engine cover.

Operation completed.


Posted on 17 December 2025 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) To replace the spark plugs in the Volkswagen Golf 7, open the bonnet and access the engine bay. You will need to loosen the bolts securing the upper …
Volkswagen Golf (2003-2008 / Golf 5, Golf V, MK 5) If you intend to replace the spark plugs on this car model yourself, you can find the various steps to follow in the description below and in the vid…
Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) Replace the spark plugs on your Golf 6 when they are damaged. Here's how to remove them. Lift the engine bonnet and secure it, then disconnect the ba…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos