Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the sun visor bulb on a Volkswagen Golf 4 vehicle.

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Light bulb

To replace the sun visor bulb on Volkswagen Golf 4 vehicles, we need to use a flathead screwdriver. Open the sun visor and insert the tip of the screwdriver into the right side of the small light. By applying slight pressure, the light will come out; disconnect the connector to replace the bulb. After replacing the bulb, reconnect the light to the connector and insert the light back into its housing, pushing it inward. This procedure is also applicable to Volkswagen Jetta and Volkswagen Bora vehicles.

Posted on 8 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Sun Visor and Handle on Volkswagen Golf Mk5
Removing Sun Visor and Handle on Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In today's video tutorial, you will see how to remove the sun visor and handle on a Volkswagen Golf Mk5. Get inside the vehicle and start by removing…
How to remove the sun visor hook of the VW Golf 7
How to remove the sun visor hook of the VW Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Replacing the damaged hook of the driver's side sun visor of a Volkswagen Golf model mk7 is a very simple and quick operation to perform independentl…
How to Replace the Sun Visor of a Volkswagen Golf
How to Replace the Sun Visor of a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Start by removing the plastic cover using a thin but sturdy tool. This will expose a screw, which you need to unscrew and remove using a Torx T20. Ne…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos