Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Sun Visor of a Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

Start by removing the plastic cover using a thin but sturdy tool. This will expose a screw, which you need to unscrew and remove using a Torx T20. Next, you need to unclip the snap-fit side of the sun visor. At this point, you can extract the sun visor. Before you can remove it completely, you need to disconnect the plug attached to it. Once you have disconnected the plug, you can pull away the sun visor. This completes the disassembly. To fit the new sun visor, simply follow the steps in reverse, successfully completing the replacement.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To replace the sun visor bulb on Volkswagen Golf 4 vehicles, we need to use a flathead screwdriver. Open the sun visor and insert the tip of the scre…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Let’s look at the main instructions on how to remove and replace the roof lining of the Volkswagen Golf. First, get inside the vehicle and start remo…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) This video provides step-by-step instructions for removing the headlining panel, commonly referred to as the headlining, on the Volkswagen Golf fifth…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos