Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
Golf VII, Golf 7, MK 7
- Years 2012-2019 In order to replace the Volkswagen Golf sun visor, you must first remove the slot on the inside of the visor by simply pulling it forward. Once the inner part of the visor has been removed, its pin can be removed from its housing by simply turning it clockwise. Now the other part will have to be removed: by disengaging the two fixing clips, the pin connected to the visor can be removed and the connector connected in its rear part will be disconnected. At this point it will be possible to insert a new spare part.
Posted on 16 March 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |