Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Sun Visor and Handle on Volkswagen Golf Mk5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

In today's video tutorial, you will see how to remove the sun visor and handle on a Volkswagen Golf Mk5. Get inside the vehicle and start by removing the sun visor; to do this, first unclip it from the right side and then unscrew the securing screw on the left side, which is found under the plastic cap. At this point, pull out the sun visor and disconnect the electrical connector of the bulb, as shown in the video.

Unscrew the screws for the supports to remove them as well; for reassembly, simply apply the reverse procedure!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to replace the sun visor bulb on a Volkswagen Golf 4 vehicle.
How to replace the sun visor bulb on a Volkswagen Golf 4 vehicle.
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the sun visor bulb on Volkswagen Golf 4 vehicles, we need to use a flathead screwdriver. Open the sun visor and insert the tip of the scre…
How to Replace the Sun Visor of a Volkswagen Golf
How to Replace the Sun Visor of a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Start by removing the plastic cover using a thin but sturdy tool. This will expose a screw, which you need to unscrew and remove using a Torx T20. Ne…
Disassembly of the interior handle of the front door of the Volkswagen Golf.
Disassembly of the interior handle of the front door of the Volkswagen Golf.
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) These short and simple steps will guide us through the process of disassembling the internal handle of the front door and the light switch of the Vol…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos