Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wheel replacement of a Volkswagen Tiguan

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Wheel

See other generations:
Video tutorial

To replace a wheel on your second-generation Volkswagen Tiguan, first park it in a safe and level location, then engage the handbrake and put it in first gear or "P" for parking if you have an automatic transmission. Now position the jack, located under the floor of the rear trunk along with the rest of the necessary equipment, at the lifting point indicated near the wheel to be replaced and lift the vehicle.

Next, loosen the wheel nuts with the provided wrench and remove the wheel itself. Once done, you can mount a new wheel by following the reverse procedure as shown in the video.


Posted on 22 January 2026 by ScegliAuto


Related tutorials

How to Replace a Wheel with the Spare on the Volkswagen Tiguan
How to Replace a Wheel with the Spare on the Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) The steps outlined in this guide will show you how to remove and replace the wheel with the spare on the Volkswagen Tiguan. First, open the rear hatc…
Removing and replacing the front wheel of the Volkswagen Tiguan
Removing and replacing the front wheel of the Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) These brief instructions will show you how to remove and replace the front wheel with the spare on the Volkswagen Tiguan. First, remove the plastic p…
How to Replace the Front Brake Pads on a Volkswagen Tiguan?
How to Replace the Front Brake Pads on a Volkswagen Tiguan?
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) To replace the front brake pads on a Volkswagen Tiguan, you need to lift the car so that the wheel corresponding to the pads being replaced is not in…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos