Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the Rear Door Trim Panel on a Volkswagen Tiguan

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Door trim panel

See other generations:
Video tutorial

Below are the instructions for removing the interior trim of the rear hatch of a Volkswagen Tiguan. First, open the rear door of the vehicle and start unscrewing the screws located under the handle and behind the plastic cover of the grab handle; then, pry at the sides to detach and remove it, disconnecting the opening handle cable and the electric connector for the window switch, as shown in the video.

At this point, reassemble the door trim panel by following the reverse procedure.


Posted on 19 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of the Volkswagen Tiguan
How to Remove the Rear Door Panel of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In a few simple steps, we will discover how to remove the rear door panel of the Volkswagen Tiguan. First, open the car's rear door and start removin…
How to remove the rear door panel of the Volkswagen Tiguan
How to remove the rear door panel of the Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Today we will discover the necessary instructions in order to disassemble and eventually replace the rear door panel of the Volkswagen Tiguan. First,…
Removing the Rear Door Panel of the Volkswagen Tiguan
Removing the Rear Door Panel of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this guide, you will find instructions to remove and replace the rear door panel of the Volkswagen Tiguan. First, open the rear door and start by …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos