|
Do it yourself
| |||
| ||||
How to Change Oil and Filter on a Volkswagen Golf MK7
Model: Volkswagen Golf
Golf VII, MK 7, Golf 7
- Years 2012-2019
Learn how to change the engine oil and filter on a Volkswagen Golf MK7: start by unscrewing the oil filler cap (this will help with draining). If using a cleaner, run the engine for 5 minutes, add the product (such as Motul, which can be found on AliExpress with code 1005008545962366 for £23.29, free delivery) and let the engine idle for 10/15 minutes while stationary. Then lift the front of the vehicle and place it on axle stands; remove the plastic undertray, position a container under the vehicle, and loosen the drain bolt: let the oil drain, which you will dispose of along with the filter at an authorised centre. While the oil drains, unscrew the old filter, then prepare the new one by lubricating the seal with clean oil. Screw the new filter on until it makes contact, then tighten it half a turn. Replace the sealing bolt on the drain. Refit the undertray and lower the car. Pour in 90% of the required oil, close the cap, start the engine for 30 seconds to fill the filter, then switch off and wait a few minutes. Check the oil level with the dipstick and add oil until it reaches just below the "max" level.
Posted on 6 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
Let's see how to replace the oil filter on a Volkswagen Golf Mk7. Position your car on a column lift and raise it to a comfortable height for disasse…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
In this video, you will see how to change the engine oil and filter on the Volkswagen Golf VII. Open the bonnet and remove the oil filler cap, then l…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
Today we will see together how to replace the engine oil and oil filter of the Volkswagen Golf model mk7. Before starting the engine oil replacement,…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.091
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |