|
Do it yourself
| |||
| ||||
How to Change Engine Oil and Filter on the Volkswagen Golf VII
Model: Volkswagen Golf
Golf VII, MK 7, Golf 7
- Years 2012-2019
In this video, you will see how to change the engine oil and filter on the Volkswagen Golf VII. Open the bonnet and remove the oil filler cap, then lift the vehicle to work underneath. Obtain a suitable container to drain the used oil, which you will dispose of correctly at an authorised centre. In the Golf VII, the filter is located at the top of the engine, so unscrew it and place it in a container. Clean the filter container, replace the seal (which you will moisten with a bit of new oil), and install the new filter. Ideally, the sump plug and seal should also be replaced. Close up once all the oil has drained, lower the vehicle, and refill with oil to the quantity specified in the user manual. Then, refit the filter. Start the engine and check the oil level. Top up if necessary.
Updated on 2 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
Today's information will show us how to perform the routine maintenance service, replacing the engine oil and oil filter, on a Volkswagen Golf 2.0 TD…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
The steps that make up the basic car service on a Volkswagen Golf 7 are quite simple to perform independently. The first step to be carried out is to…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
Today we will see together how to replace the engine oil and oil filter of the Volkswagen Golf model mk7. Before starting the engine oil replacement,…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Front Bumper of the Citroën C4 Picasso?
To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.191
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |