Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light in a Volkswagen Polo?

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Service warning light

In this tutorial, you will see how to reset the service light in a Volkswagen Polo, an extremely simple and quick operation that should only be performed after completing all scheduled maintenance tasks. First, enter the cabin, then insert the key but leave it in the initial position. Next, press and hold the '0.0/SET' button located in the centre of the dashboard, turn on the instrument panel at the same time, and after a couple of seconds, release the button and then press the opposite one. Finally, complete the procedure by restarting the vehicle.

Posted on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Start by sitting in the driver's seat of your Volkswagen Polo. Next, press and hold the "0.0/SET" button located below the multifunction display of t…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Before you begin, sit in the driver's seat of your Volkswagen Polo. Start by pressing and holding the button located beneath the speedometer. At the …
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Before starting, sit in the driver's seat of your Volkswagen Polo. Press and hold the button located below the right side of the multifunction displa…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - What to do when the oil light comes on on Volkswagen Polo? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos