Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs of a Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

This video is currently unavailable

How to replace the bulbs located in the front headlamp of a Volkswagen Up? Open the front bonnet by pulling the lever located at the bottom right of the dashboard (secure it with the prop rod). Locate the rubber inspection cap (at the back of the headlamp) and remove it. You will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the damaged bulbs using a screwdriver (lever them out). Fit the new bulbs (always of the correct type and size) and insert the bulb holder back into the headlamp housing.

Close the inspection compartment with the cap and test the lights.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on Volkswagen Up
How to Replace the Front Headlight Bulbs on Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Have you blown a front headlight bulb? Here’s how to remove them on the Volkswagen Up. Open the front bonnet by pulling the lever located at the bott…
How to Replace the Front Headlight Bulbs on a Volkswagen Up
How to Replace the Front Headlight Bulbs on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) How to replace the front headlight bulbs on a Volkswagen Up? Follow these steps: open the bonnet by pulling the lever located at the bottom right of …
Replacing the Front Headlight Bulb on a Volkswagen Up
Replacing the Front Headlight Bulb on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let's see how to replace the damaged bulb of the front headlight. Lift the front bonnet by pulling the lever located at the bottom right of the dashb…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos