Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on a Volkswagen Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Tail light

Today, we will discover the steps to remove and replace the rear light on a Volkswagen Golf. First, open the boot lid and start removing the side interior trim to access the inside of the light; unscrew the securing screws and disconnect the electrical connector of the lights to remove the lamp from the outside, as shown in the video. At this point, replace just the bulbs or the entire rear light, securing it to the bodywork and making the connection; check the operation of all the stop lights!

Posted on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear headlight of the Volkswagen Golf
How to disassemble the rear headlight of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The steps to remove the rear light of the Volkswagen Golf model MK 7 are simple and quick to perform independently and do not require the use of any …
How to Remove the Rear Light Bulbs on a Volkswagen Golf 4
How to Remove the Rear Light Bulbs on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Are the rear light bulbs blown on a VW Golf 4? Let’s see how to remove the bulbs from the light. Open the boot of the Golf, remove the cover cloth, a…
Removing the Rear Headlamp of a Volkswagen Golf 6
Removing the Rear Headlamp of a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Is the rear headlamp of your Volkswagen Golf 6 due for replacement? Here’s how to remove it. Open the boot lid, remove the side fabric cover, and acc…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos