Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service on the Volkswagen Transporter Van?

Model: Volkswagen Transporter T6, MK 6 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the service on the Volkswagen Transporter van, an extremely simple and quick operation that should only be done once all scheduled maintenance work has been completed. First, enter the cabin, then insert the key and turn on the instrument panel.

Next, navigate to the oil life screen using the directional controls on the steering wheel. Turn off the ignition, turn it back on while holding down both the accelerator and brake pedals, and keep them both pressed until the reset is complete.


Posted on 24 June 2026 by ScegliAuto


Related tutorials

Volkswagen Transporter (2003-2014 / T5, MK 5) .. In this tutorial, you will see how to reset the service on the Volkswagen Transporter van, a very simple and quick operation to perform.. …
Volkswagen Transporter (2014-2025 / T6, MK 6) In this tutorial, you will see how to reset the service in a Volkswagen Transporter van, a very simple and quick operation, to be performed only afte…
Volkswagen Transporter (2014-2025 / T6, MK 6) In this tutorial, you will see how to reset the oil service on a Volkswagen Transporter van, a very simple and quick operation that should only be pe…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos