Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Handbrake on the Volkswagen Golf VI

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Parking brake

To adjust the handbrake on the Volkswagen Golf VI (in this case, a 2011 model), you need to remove the central console. It is not necessary to completely disassemble it: just unscrew the screws to access the mechanism. Start by removing the cup holder by unscrewing the two screws. Then unscrew the two screws under the console and the side screw (repeat on the other side). At this point, push the console cover forward: it will remain in place but will give you access to the internal screws. Inside, you will find one screw near the seat, one in the centre, and one at the front. Once removed, lift the panel, and you will have access to the handbrake adjuster. This is a nut or screw that adjusts the tension of the cable. Turn it to increase the handbrake travel (clockwise to tighten). Reassemble everything in reverse order and check the handbrake travel: it should have 3-4 clicks of play.

Posted on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) In order to adjust the handbrake of the Volkswagen Golf, you need to turn on the instrument panel by turning the key in the ignition switch: once the…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To adjust the handbrake on a Volkswagen Golf, loosen the screws that secure the plastic cover of the centre tunnel. Once these three screws are loose…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this guide, adjust the handbrake on a Volkswagen Golf 4. Use a screwdriver to remove the cover located at the back of the armrest; disconnect the …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos