Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Volkswagen Golf?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

In this guide, we will cover the steps to reset the tyre pressure light on the Volkswagen Golf. Before recalibrating the TPMS sensors, ensure all four tyres are at the correct operating pressure. Then, get into the vehicle and turn on the ignition.

Open the glove compartment to locate the TPMS reset button, holding it down for about three seconds to permanently reset the light on the instrument cluster. This completes the TPMS reset!


Posted on 12 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on the Volkswagen Golf?
How to Reset the Tyre Pressure Light on the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To reset the tyre pressure light on the Volkswagen Golf, inflate the tyres to the recommended pressure: this value is written on the sticker attached…
How do you reset the tire pressure warning light on the Volkswagen Golf?
How do you reset the tire pressure warning light on the Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The tire pressure warning light reset operation of the Volkswagen Golf is carried out by inflating the tires to the recommended pressure value: once …
Reset of the tire pressure warning light for the Volkswagen Golf.
Reset of the tire pressure warning light for the Volkswagen Golf.
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's instructions will allow us to reset the tire pressure warning light on the Volkswagen Golf. Before performing the reset of the TPMS sensors, …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos